Types of CDL licenses: Class A, Class B, and Class C explained

If you are new to commercial driving, learning the types of CDL licenses is one of the first steps that matters. Many people hear the term CDL and assume it refers to one single license. In reality, CDL licenses are divided into three classes based on vehicle type, weight, passenger use, or hazardous materials use. That is why choosing the right class early can save time, training costs, and testing delays.

In this blog, we’ll break down the types of CDL licenses, answer what the 3 types of CDL licenses are, and explain what a Class A CDL license, Class B CDL license, and Class C CDL license actually allow. By the end, you will have a clearer idea of which CDL class fits the vehicle and job you want before you start the application process.

Straight box truck driving on the road as an example of a Class B CDL vehicle

The short answer: What are the 3 types of CDL license?

Under FMCSA’s federal standards, the three CDL groups are Class A, Class B, and Class C. Class A covers combination vehicles with a gross combination weight rating of 26,001 pounds or more when the towed unit is over 10,000 pounds. Class B covers a single vehicle with a gross vehicle weight rating of 26,001 pounds or more, or that vehicle towing a unit that does not exceed 10,000 pounds. Class C covers vehicles that do not meet the Class A or Class B definitions but are either designed to transport 16 or more passengers, including the driver, or are used to transport placarded hazardous materials.

That means the class is not based on what sounds bigger or more professional. It is based on the vehicle setup and, in some cases, the type of work being done. So when people ask about the types of CDL licenses, the real answer starts with vehicle grouping, not job title.

Before choosing between the different types of CDL licenses, it helps to understand the full CDL license requirements for new drivers and what the application process looks like from the start.

What a class a CDL license allows

A Class A CDL license is for combination vehicles. Under the federal rule, that means any combination of vehicles with a gross combination weight rating or gross combination weight of 26,001 pounds or more, as long as the towed unit is over 10,000 pounds. This is the class most people think of when they picture a tractor-trailer or semi hauling a full trailer.

This class usually fits long-haul trucking, many over-the-road freight jobs, and other setups where a power unit is pulling a heavier trailer. It is also the broadest of the three license groups. Under the federal relation-between-groups rule, a driver who has passed the tests for Group A may also operate Group B or Group C vehicles, as long as the driver has any needed endorsements.

So if a driver plans to move into full combination-vehicle work, a Class A CDL license is usually the class to target from the beginning.

Line of heavy commercial trucks showing one of the main types of CDL licenses

What a Class B CDL license allows

A Class B CDL license is for a heavy straight vehicle. Under FMCSA’s standard, that means any single vehicle with a GVWR of 26,001 pounds or more, or that vehicle towing another vehicle that does not exceed 10,000 pounds.

This class often fits straight trucks, many large box trucks, some buses, dump trucks, and other vehicles that are heavy but not built as combination tractor-trailer units. It is a strong fit for drivers who want commercial driving work without moving into full Class A combination setups.

A driver who qualifies for Group B may also operate Group C vehicles if the needed endorsements are in place. But Group B does not automatically step up into Group A. If a driver later wants to move into tractor-trailer work, they must upgrade and meet the related requirements for Group A.

What a Class C CDL license allows

A Class C CDL license is different from the first two because it is not mainly about heavy-weight. It covers vehicles that do not meet the Class A or Class B definitions but are either designed to transport 16 or more passengers, including the driver, or are used to transport hazardous materials that require placards.

This is where many beginners get confused. They assume Class C means “small commercial vehicle” in a general sense. That is not how FMCSA defines it. A vehicle can fall into Class C because of passenger capacity or hazmat use, even if it is not the largest vehicle on the road.

So, if you are asking when a CDL is required for a passenger or hazmat vehicle that does not meet the heavier A or B weight thresholds, a Class C CDL license may be the answer.

Hazmat response scene that supports discussion of hazardous materials endorsements

Endorsements are not the same thing as license classes

One reason people mix up CDL types is that they conflate classes and endorsements into a single concept. FMCSA separates them. The license class tells you the vehicle group. Endorsements add permission for certain special operations, such as double/triple trailers, tank vehicles, passenger vehicles, school buses, or hazardous materials.

That means a driver does not choose between “Class A” and “hazmat” as if they are equal categories. The class comes first. Then the driver may need endorsements depending on the job and vehicle.

How to choose the right CDL class

The best way to choose is to work backward from the vehicle and the job you want. If the job involves a combination vehicle with a heavier trailer, look at Class A. If it involves a heavy straight truck or similar single vehicle, look at Class B. If it involves a passenger vehicle or placarded hazmat vehicle that does not meet Class A or B, look at Class C.

This is also where training matters. FMCSA’s ELDT rule applies to first-time Class A and Class B applicants, to drivers upgrading from Class B to Class A, and to first-time school bus, passenger, and hazardous materials endorsement applicants. That means the class you choose can affect the training path you have to complete before testing.

Small passenger bus example used to explain types of CDL licenses

The mistake many new drivers make

A lot of new drivers choose a class based on what sounds more flexible without first looking at the actual vehicle they plan to operate. Others assume endorsements replace the need for the right class. Both mistakes can waste time. The cleaner move is to identify the vehicle group first, then check endorsements second, then confirm what training and testing apply.

For employers, this matters too. Putting a new hire on the wrong licensing path can delay onboarding and create confusion around training, testing, and job eligibility.

Final takeaway

Choosing between the types of CDL licenses gets easier once you start with the vehicle, not the job title. The right class depends on what the vehicle weighs, how it is configured, and whether the work involves passengers or placarded hazardous materials. Once that part is clear, you can move on to the next step with more confidence: confirming endorsements, training, and testing requirements before you apply.

And if you are an employer bringing on first-time CDL drivers, getting the license class right is only the start. Once those drivers move into covered work, the compliance side has to be organized too. That is where Consortium Pool can help keep the drug and alcohol testing piece in order after hiring begins.

Passengers riding inside a bus that fits some Class C CDL situations

Frequently Asked Questions

Can a Class A CDL driver operate Class B and Class C vehicles?

Yes. Under 49 CFR § 383.91, a driver who has passed the tests for Group A may operate Group B or Group C vehicles, as long as the driver has any required endorsements.

Can a Class B CDL driver operate Class C vehicles?

Yes. The same federal rule says a driver who has passed the tests for Group B may operate Group C vehicles, again assuming the driver has any needed endorsements.

Do endorsements change the class of CDL you hold?

No. FMCSA treats endorsements as added permissions for certain vehicle types or operations, while the class still comes from the vehicle group. Endorsements may be required for passenger vehicles, school buses, tanks, hazardous materials, or doubles/triples, but they do not replace the need for the correct class.

Do first-time Class A and Class B applicants need entry-level driver training?

Yes. FMCSA’s ELDT rules apply to first-time Class A and Class B applicants, as well as drivers upgrading from Class B to Class A and people getting certain endorsements for the first time. The training must be completed through a provider listed on FMCSA’s Training Provider Registry.

Does FMCSA issue the CDL directly?

No. FMCSA says state governments are responsible for issuing CDLs. FMCSA sets the federal standards, but the actual credential comes from the driver’s state.

Consortium Pool is an independent private company providing compliance management and testing coordination services. We are not affiliated with, endorsed by, or operated by the DOT, FMCSA, FAA, TLC, PUC, or any government agency. We improve our products and advertising by using Microsoft Clarity that captures how people interact with our website. By using our site, you agree that we and Microsoft can collect how you use and interact with our website through behavioral metrics, heatmaps, and session replay to improve and market our products/services. Website usage data is captured using first and third-party cookies and other tracking technologies to determine the popularity of products/services and online activity. Additionally, we use this information for site optimization, fraud/security purposes, and advertising. For more information about how Microsoft collects and uses your data, visit the Microsoft Privacy Statement.

© 2026 Consortium Pool. All Rights Reserved. Powered by Alecan Marketing Solutions | Terms & Conditions | Privacy Policy